I mentioned a short while ago that Genesi had become a Bodhi affiliate. They sent me one of their Smartbooks to get hacking at and today I would like to share my first batch of public files for it. The following is a short HOWTO for getting a Debian Wheezy file system with the Bodhi Enlightenment desktop running on your Genesi Smartbook.
First - Preparing the SD Card:
You will need an SD card that is at least 4GB. We need two partitions on this card, the first is a small EXT3 partition (at least 64MB) and then a second EXT4 partition that takes up the remainder of the card. Use your tool of choice to prepare the SD card, personally I prefer "GParted":
Second - Getting the Files:
Two archives contain everything you need to get Bodhi rolling on your Smartbook. Grab the latest rootfs and boot partitions from here.
Third - Extracting the Files:
Place the boot archive in the ext3 partition of your SD card and extract the files there. Place the rootfs archive in the ext4 partition of your SD card and extract the files there.
Thats it - you are all set! Simply place the SD card in your Smartbook and boot it up. In a few moments you should be greeted with an Enlightenment desktop. The default user information is:
Username: bodhi
Password: bodhi
The bodhi account is configured to be able to use "sudo", but a root account is also in existence with a password of "bodhi".
Known Issues:
This is a early release for others wanting to help me test and debug things. It is fairly functional in it's current state, but please be aware of two issues with the first release I am aware of -
- Audio is non-functional
- Shutdown/Restart/Suspend cannot be done via Enlightenment Menu
Installing to Internal Memory:
If you like the Bodhi image and want to install it to your internal system memory (typically much faster than an SC card) it is fairly easy to do so. By default the internal drive has two paritions, one located at /dev/sda1 and a second at /dev/sda2. Mount these while booted from the SD card and remove their current contents. Then simply extract the boot archive to /dev/sda1 and the rootfs to /dev/sda2. Finally, you will need to remove the default boot.scr the boot archive provides and rename the boot.scr.sda to simply boot.scr
Trouble Shooting:
If you encounter an issue getting Bodhi setup on your Smartbook please do not leave a comment here about it. Instead open a thread in the Genesi Section of our user forums.
Photos:
Finally here are a couple of slightly terrible photos of Bodhi booted on my Genesi.
Cheers,
~Jeff Hoogland
0 comments:
Post a Comment